Toyota Prado 150 Modular Drawer Systems

DESIGN:
Featuring a sleek modern design, high quality components and the ability to create a fully customised system tailored to your requirements, the Outback Solutions range is the answer to all your storage needs. For the Toyota Prado 150 series 7 seat models, create your drawer solution utilising a combination of 945 Drawer and Roller Floor modules. For more options the RD745 is available as a stacking drawer on top of a RD945 drawer. It is recommended that two modules are installed side by side in GXL, VX and Kakadu models, due to the unattractive floor area revealed once the third row seats are removed. This new product notification contains information on Prado 150 7- seat GXL, VX and Kakadu installation kit and side floor kits

INSTALLATION KIT:
New in Roller Drawer fitment is the introduction of installation kits. Installation kits are required when a vehicle has specific installation requirements that are not shared by other applications. For example, seven seat variants of the 150 Prado have a large plastic trim across the rear door space floor that requires removal (see image on following page). Replacement trim and hardware are supplied in an install kit. Install kit part numbers all finish with the letters “IK” to represent Installation Kit.

SIDE FLOOR KIT:
Specifically designed around the seven seat Prado, PR097SFK provides users with a visually pleasing side floor and ties in with the PR09IK install kit. Removable top panels provide access to side storage and the emergency jack. Simple flush fitting locks retain the panel so they won’t bounce out on rough terrain. Hardy commercial carpet trims the top surfaces, while boot carpet trim completes the lower surface. Seven seat vehicles also require the PR09IK installation kit, shown in the picture on the previous page. PR097SFK side floor kit includes both left and right hand side panels. Due to the unattractive floor area revealed once the third row seats are removed, it is highly recommended that a PR097SFK is used when installing RD945 or RDRF945 Roller Drawer modules into GXL, VX and Kakadu models. See main image on page 1 for side floors installed.

ROLLER FLOOR SIDE FLOOR KIT:
When third row seats are removed from GXL, VX and Kakadu models, the lower portion of the interior wall is open and exposes the floor and wiring. Use of a roller floor side floor kit covers this otherwise unattractive area. The floor sections are held in place by hex socket head screws and retain access to the emergency jack. The space below the floor is limited as storage due to its small size, however makes a nice out of sight “secret” and hard to access location for valuables. Trimmed in the same hardy commercial carpet this product provides a flat floor to the side of Roller floor modules. The PR097SRFFK includes both left and right hand side panels. Due to the unattractive floor area revealed once the third row seats are removed, it is highly recommended that a PR097SRFFK is used when installing RF945 Roller Floor module into GXL, VX and Kakadu models.